gbpc12, 15, 25 and 35 document number 88612 08-jul-05 vishay general semiconductor www.vishay.com 1 ~ ~ ~ ~ ~ ~ gbpc gbpc-w glass passivated single-phase bridge rectifier major ratings and characteristics i f(av) 12 a, 15 a, 25 a, 35 a v rrm 50 v to 1000 v i fsm 200 a, 300 a, 300 a, 400 a i r 5 a v f 1.1 v t j max. 150 c features ul recognition file number e54214 universal 3-way terminals: snap-on, wire wrap- around, or p.c.b. mounting typical i r less than 0.3 a high surge current capability low thermal resistance solder dip 260 c, 40 seconds typical applications general purpose use in ac-to-dc bridge full wave rec- tification for power supply, home appliances, office equipment, industrial automation applications mechanical data case: gbpc, gbpc-w epoxy meets ul-94v-0 flammability rating terminals: nickel plated on faston lugs or silver plated on wire leads (e4 suffix), solderable per j-std-002b and jesd22-b102d. suffix letter "w" added to indicate wire leads (e.g. gbpc12005w) polarity: as marked, positive lead by belevled corner mounting torque: 20 inches-lbs. max. maximum ratings ratings at 25 c ambient temper ature unless otherwise specified. parameter symbols gbpc12, 15, 25, 35 units 005 01 02 04 06 08 10 maximum repetitive peak reverse voltage v rrm 50 100 200 400 600 800 1000 v maximum rms voltage v rms 35 70 140 280 420 560 700 v maximum dc blocking voltage v dc 50 100 200 400 600 800 1000 v maximum average forward rectified output current (see fig.1) gbpc12 gbpc15 gbpc25 gbpc35 i f(av) 12 15 25 35 a peak forward surge current single sine- wave superimposed on rated load gbpc12 gbpc15 gbpc25 gbpc35 i fsm 200 300 300 400 a rating (non-repetitive, for t greater than 1 ms and less than 8.3 ms) for fusing gbpc12 gbpc15 gbpc25 gbpc35 i 2 t 160 375 375 660 a 2 sec rms isolation voltage from case to leads v iso 2500 v operating junction storage temperature range t j , t stg - 55 to + 150 c
www.vishay.com 2 document number 88612 08-jul-05 gbpc12, 15, 25 and 35 vishay general semiconductor electrical characteristics ratings at 25 c ambient temper ature unless other wise specified. thermal characteristics ratings at 25 c ambient temper ature unless other wise specified. notes: (1) thermal resistance from junction to case per leg (2) bolt down on heatsink with silicone thermal compound between bridge and mounting surface for maximum heat transfer with #10 screw ratings and characteristics curves (t a = 25 c unless otherwise noted) parameter test condition symbols gbpc12, 15, 25, 35 units 005 01 02 04 06 08 10 maximum instantaneous forward drop per leg gbpc12 gbpc15 gbpc25 gbpc35 i f = 6.0 a i f = 7.5 a i f = 12.5 a i f = 17.5 a v f 1.1 v maximum reverse dc current at rated dc blocking voltage per leg t a = 25 c t a = 125 c i r 5.0 500 a typical junction capacitance per leg at 4 v, 1 mhz c j 300 pf parameter symbols gbpc12, 15, 25, 35 units 005 01 02 04 06 08 10 typical thermal resistance per leg (1) gbpc12-25 gbpc35 r jc 1.9 1.4 c/w figure 1. maximum output rectified current case temperature (c) average forward current (a) 0 25 50 75 100 125 150 175 200 0 5 10 15 20 25 30 35 40 bridges mounted on 9.5 x 3.5 x 4.6" (22.9 x 8.9 x 11.7 cm) al. finned plate 5x6x 4.9" al, finned plate 5x4x3" al. finned plate 6 x 2.2 x 2.2" al. finned plate 60 h z resistive or inductive load figure 2. maximum output rectified current ambient temperature (c) average forward current (a) 0 10 20 30 40 50 60 70 80 90 100 0 5 10 15 20 25 30 35 40 60 h z resistive or inductive load gbpc35 rths-a = 0.5 c/w gbpc25 rths-a = 0.5 c/w gbpc15 rths-a = 1.0 c/w gbpc12 rths-a = 1.0 c/w
gbpc12, 15, 25 and 35 document number 88612 08-jul-05 vishay general semiconductor www.vishay.com 3 figure 3. maximum power dissipation figure 4. maximum non-repetitive peak forward surge current per leg figure 5. typical instantaneous fo rward characteristics per leg average output current (a) average power dissipation of bridge (w) 0 10 20 30 40 0 10 20 30 40 50 60 70 80 capacitive load t j =t j max. resistive or inductive load number of cycles at 60 h z peak forward surge current (a) 1 10 100 100 500 1.0 cycle gbpc35 t j =t j max. 0.5 single sine-wave gbpc15 gbpc25 gbpc12 instantaneous forward voltage (v) instantaneous forward current (a) 0.4 0.6 0.8 1 1.2 1.4 1.6 0.01 0.1 1 10 100 t j =25c pulse width = 300 s 1% duty cycle figure 6. typical reverse leak age characteristics per leg figure 7. typical junc tion capacitance per leg figure 8. typical transient thermal impedance per leg percent of rated peak reverse voltage (%) instantaneous reverse leakage current ( a) 0 20 40 60 80 100 0.01 0.1 1 10 100 50 - 400 v 600 - 1000 v t j = 150 c t j = 125 c t j =25c reverse voltage (v) junction capacitance (pf) 1 10 100 50 100 600 t j =25c f = 1.0 mh z vsig = 50mvp-p t, heating time (sec.) transient thermal impedance (cw) 0.01 0.1 1 10 100 1 10 100 1,000 t j =25 c f = 1.0 mh z vsig = 50mvp-p
www.vishay.com 4 document number 88612 08-jul-05 gbpc12, 15, 25 and 35 vishay general semiconductor package outline dime nsions in inches (millimeters) 1.135 (28.8) 1.115 (28.3) 0.732 (18.6) 0.692 (17.6) 0.470 (11.9) 0.430 (10.9) 0.042 (1.07) 0.038 (0.97) dia. 0.310 (7.62) 0.290 (7.36) 1.25 (31.8) min. 1.135 (28.8) 1.115 (28.3) 0.732 (18.6) 0.692 (17.6) hole for #10 screw 0.220 (5.59) 0.200 (5.08) dia. 0.24 (6.0) 0.18 (4.6) 0.50 (12.7) 0.44 (11.7) 0.24 (6.0) 0.18 (4.6) gbpc-w 1.135 (28.8) 1.115 (28.3) 0.672 (17.1) 0.632 (16.1) 0.732 (18.6) 0.692 (17.6) 0.094 (2.4) dia. 0.034 (0.86) 0.030 (0.76) 0.25 (6.35) ac 0.840 (21.3) 0.740 (18.8) 0.582 (14.8) 0.542 (13.8) 0.672 (17.1) 0.632 (16.1) 1.135 (28.8) 1.115 (28.3) hole for #10 screw 0.220 (5.59) 0.200 (5.08) dia. 0.310 (7.62) 0.290 (7.36) gbpc 0.034 (0.86) 0.030 (0.76)
legal disclaimer notice vishay document number: 91000 www.vishay.com revision: 08-apr-05 1 notice specifications of the products displayed herein are subjec t to change without notice. vishay intertechnology, inc., or anyone on its behalf, assume s no responsibility or liability fo r any errors or inaccuracies. information contained herein is intended to provide a product description only. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. except as provided in vishay's terms and conditions of sale for such products, vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and /or use of vishay products including liab ility or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyrigh t, or other intellectual property right. the products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify vishay for any damages resulting from such improper use or sale.
|
